Engineering, 17.10.2020 21:01, katelynn73
A road embankment test section is being studied to assess the impact of fines content. A small test hole is made in the embankment from which an in situ sample was retrieved. The moist sample volume, mass, and specific gravity were determined as 510 cm3, 960 g, and Gs 2.70, respectively; the oven-dried sample mass was 804 g. A 500-g portion of the dried sample was used with a 275 cm3 mold to determine Yd(min) and emax The same portioned sample was then vibrated and compacted to a volume of 220 cm3 to find Yd(max) and emin What is the relative density of this sample? Comment on the result? GIVEN: m=910g ms = 804 g emax &min First find e: Gis 2.70 Wsms
Answers: 1
Other questions on the subject: Engineering
Engineering, 04.07.2019 16:10, TheOriginalMeyah
An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)
Answers: 2
Engineering, 04.07.2019 18:10, ahmedeldyame
Aloaded platform of total mass 500 kg is supported by a dashpot and by a set of springs of effective stiffness 72 kn/m. it is observed that when the platform is depressed through a distance x = 12.5 cm below its equilibrium position and then released without any initial velocity; it reaches its equilibrium position in the shortest possible time without overshoot. find the position and velocity of the loaded platform 0.10 sec. after its release. if a further load of 400 kg is added to the platform, find, i) the frequency of damped vibrations, and i) the amplitude of vibration after 2 complete oscillations, given that the initial amplitude is 15 cm.
Answers: 1
Engineering, 04.07.2019 18:20, aly95
An engine runs on the ideal diesel cycle. the cycle has a compression ratio of 20 and a cutoff ratio of 2. the highest temperature in the cycle is 1200 k. if the heat into the system is 300 kj/kg of working fluid and using variable specific heats determine the work produced per mass of working fluid
Answers: 3
Engineering, 04.07.2019 19:10, pjgolden04
How to increase the thermal officiency of an ideal simple rankino cycle? among these methods, which one is the best and why?
Answers: 2
Do you know the correct answer?
A road embankment test section is being studied to assess the impact of fines content. A small test...
Questions in other subjects:
Business, 02.04.2020 04:24
