Engineering, 16.10.2020 09:01, dyanaycooper13

Brent needs a board that is 3' 7/8" for the house he is building. He marks a board at 37" from the end and makes the cut. The board will be 1/8" too short, which is insignificant, so the board can be used.
The board will be 1/8" too long, which is insignificant, so the board can be used.
The board will be 1/8" too long, which is significant, so the board cannot be used.
The board will be 1/8" too short, which is significant, so the board cannot be used.

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, mirmir62

Machinery that is a key part of the process and without which the plant or process cannot function is classifed as: (clo4) a)-critical machinery b)-essential machinery c)-general purpose machinery d)-none of the specified options.

Answers: 1

continue

Engineering, 04.07.2019 19:10, kayleeemerson77

Analyze the factors that influence the choice between the following pairs of processes to make the products indicated: i) sand casting versus die casting of an electric-motor housing ii) thread rolling versus machining of a bolt for high-strength application. (co3/c5)

Answers: 3

continue

Engineering, 04.07.2019 19:20, nikkiebartels

Afan that can provide air speeds up to 60 m/s is to be used in a low-speed wind tunnel with atmospheric air at 35 c. if one wishes to use the wind tunnel to study flat-plate boundary layer behavior up to reynolds numbes of re 10, what is the minimum plate length that should be used? at what distance from the leading edge would transition occur if the critical reynolds nurnber were rer, e = 5 × 105?

Answers: 2

continue

Engineering, 06.07.2019 03:10, DeathFightervx

Air is flows through an adiabatic nozzle with an inlet pressure of 400 psia at a temperature of 300°f and a velocity of 20 ft/s. the outlet pressure is 40 psia and the velocity is 800 ftl/s. determine the outlet temperature of the air using: a) property tables b) specific heat (using the specific heat value for air at 300°f)

Answers: 3

continue

Do you know the correct answer?

Brent needs a board that is 3' 7/8" for the house he is building. He marks a board at 37" from the e...