Engineering
Engineering, 16.10.2020 07:01, hbstanley3

Each of 11 refrigerators of a certain type has been returned to a distributor because of an audible, high-pitched, oscillating noise when the refrigerators are running. Suppose that 7 of these refrigerators have a defective compressor and the other 4 have less serious problems. If the refrigerators are examined in random order, let X be the number among the first 6 examined that have a defective compressor. (a) Calculate P(X = 4) and P(X ≀ 4). (Round your answers to four decimal places.) P(X = 4) = P(X ≀ 4) = (b) Determine the probability that X exceeds its mean value by more than 1 standard deviation. (Round your answer to four decimal places.) (c) Consider a large shipment of 400 refrigerators, of which 40 have defective compressors. If X is the number among 25 randomly selected refrigerators that have defective compressors, describe a less tedious way to calculate (at least approximately) P(X ≀ 5) than to use the hypergeometric pmf. We can approximate the hypergeometric distri

answer
Answers: 1

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, DestyHilBan1183
Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.
Answers: 3
image
Engineering, 04.07.2019 18:20, yasyyas646646
Agas mixture consists of 8 kmol of h2 and 2 kmol of n2. determine the mass of each gas and the apparent gas constant of the mixture.
Answers: 3
image
Engineering, 04.07.2019 19:20, GusGus11
The power source in a certain welding setup generates 3500w that is transferred to the low carbon steel work with a heat transfer factor of 0.85. the melting factor in the operation is 0.45. a continuous fillet weld is to be made with a cross-sectional area of 23 mm2 determine the travel speed at which the welding can be accomplished.
Answers: 3
image
Engineering, 04.07.2019 19:20, molly7654
Brief discuss how the presence of dislocations in crystal structures can be an advantage and a disadvantage to engineer and designers.
Answers: 3
Do you know the correct answer?
Each of 11 refrigerators of a certain type has been returned to a distributor because of an audible,...

Questions in other subjects:

Konu
English, 22.09.2019 02:20