Engineering
Engineering, 15.10.2020 14:01, battlemarshmell

A developer reviewing the design of a $20 million building faces a tradeoff between construction costs and energy consumption. The current design requires 10 million btu/year of heating and cooling power. Available modifications such as the addition of awnings, improved insulation, and solar panels could save up to 7 million btu/year, at a total additional cost of $4 million. Since the range of possibilities and the uncertainties involved with some modification technologies, the developer wants you to help her sort out her preferences. From interviews you determine that for building cost, she is indifferent between

$22.5M and ($24M, 0.5; $20M)
$23.4M and ($24M, 0.5; $22.5M)
$21.5M and ($22.5M, 0.5; $20M)

regardless of the level of energy used.

Similarly, for energy consumption in millions of btu/year, she is indifferent between

5 and (10, 0.5; 3)
3.75 and (5, 0.5; 3)
7 and (10, 0.5; 5)

regardless of the level of costs.
For combinations of costs and energy, she is indifferent between

($20M, 10) = the current plan and [($24M, 10), 0.1; ($20M, 3)]

and also indifferent between

($24M, 3) = the maximum energy conservation plan and [($24M, 10), 0.2; ($20M, 3)]

Required:
a. Solve for the implied utilities from the indifference statements above.
b. Would the developer prefer the current design or the alternative [(22.5, 7), 0.6; (22.4, 3.75)]?
c. Find K by applying the general formula and check the results from part (b).

answer
Answers: 1

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, tobyhollingsworth178
Which from the following instrument is commonly used to detect the high pitch butzing sound in bearings? [clo4] a)-digital ultrasonic meter b)-infrared camera c)-spectroscopic d)-vibrometer
Answers: 2
image
Engineering, 04.07.2019 18:20, sarah7984
Vibration monitoring this technique uses the noise or vibration created by mechanical equipment and in seme cases by plant systems to detemine their actual condtion. a)- true b)- false
Answers: 2
image
Engineering, 04.07.2019 18:20, maustin5323
Athin walled concentric tube exchanger is used to cool engine oil from 160°c to 60°c with water that is available at 25°c acting as a coolant. the oil and water flow rates are each at 2 kg/s, and the diameter of the inner tube is 0.5 m and the corresponding value of the overall heat transfer coefficient is 250 w/m2. oc. how long must the heat exchanger be to accomplish the desired cooling? cpwater=4.187 kj/kg-candcpengine el=2.035 kj/kg·°c, oil . 120]
Answers: 1
image
Engineering, 04.07.2019 18:20, aly95
An engine runs on the ideal diesel cycle. the cycle has a compression ratio of 20 and a cutoff ratio of 2. the highest temperature in the cycle is 1200 k. if the heat into the system is 300 kj/kg of working fluid and using variable specific heats determine the work produced per mass of working fluid
Answers: 3
Do you know the correct answer?
A developer reviewing the design of a $20 million building faces a tradeoff between construction cos...

Questions in other subjects: