Engineering, 15.10.2020 04:01, kaliyaht01

In a dairy operation, milk at a flow rate of 250 L/h and a cow-body temperature of 38.6 oC must be chilled to a safe-to-store temperature of 13 oC or less. Ground water at 10 oC is available at a flow rate of 0.72 m3/h. The density and specific heat of milk are 1030 kg/m3 and 3860 J/kg∙K, respectively. a) By using NTU method, determine the UA product of a counterflow heat exchanger required for the chilling process. Determine the length of the exchanger if the inner pipe has a50-mm diameter and the overall heat transfer coefficient is U = 1000 W/m2∙K.
b) Determine the outlet temperature of the water.

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 15:10, margaret1758

If you were designing a bumper for a car, would you prefer it to exhibit elastic or plastic deformation? why? consider the functions of a bumper in both a minor "fender-bender" and a major collision.

Answers: 1

continue

Engineering, 04.07.2019 18:20, rjone8429

Asimple rankine cycle uses water as the working fluid. the water enters the turbine at 10 mpa and 480c while the condenser operates at 6 kpa. if the turbine has an isentropic efficiency of 80 percent while the pump has an isentropic efficiency of 70 percent determine the thermal efficiency

Answers: 1

continue

Engineering, 04.07.2019 18:20, cdyshaylia55

Water vapor initially at 10 bar and 400 °c is contained within a piston-cylinder assembly. the water lost heat to the surrounding according to isochoric (iso-volumetric) process until its temperature is 150 °c. the water is then condensed isothermally to saturated liquid. for the water as a system, calculate the work in kj/kg

Answers: 2

continue

Engineering, 04.07.2019 19:10, babas97

What is a monomer? how do they form a ploymer from the view point of chemical bonding?

Answers: 1

continue

Do you know the correct answer?

In a dairy operation, milk at a flow rate of 250 L/h and a cow-body temperature of 38.6 oC must be c...