Engineering, 13.10.2020 03:01, kevo2024

A well in the Gulf of Mexico had a very long flow period (longer than the time to get out of transient flow) at a rate of 39,239 stb/day and a bottomhole flowing pressure of 5,200 psia. The volumetric average reservoir pressure for the well was 11,856 psia and the bubble point pressure was 6,504 psia. Because of platform limitations and to estimate whether a planned recompletion will hold up, your boss has asked you to estimate what the bottom hole flowing pressure would be for a flow rate of 20,000 stb/day. The answer you would provide her with is:

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, lowkeyqueenk

Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk

Answers: 1

continue

Engineering, 04.07.2019 18:20, ashleyjaslin

Derive the correction factor formula for conical nozzle i=-(1+ cosa) and calculate the nozzle angle correction factor for a nozzle whose divergence hal-fangle is 13 (hint: assume that all the mass flow originates at the apex of the cone.

Answers: 3

continue

Engineering, 04.07.2019 18:20, kendrawalraven

The characteristic roots of a dynamic system are: 1.7920 1.8160 i, -1.7920 1.8160 i, -0.4160 what is the order of this system? what are the settling time and damping ratio of the system?

Answers: 3

continue

Engineering, 04.07.2019 19:10, Lexi5170

A)-explain briefly the importance of standards in engineering design. b)- what is patent? c)-explain the relationship between these standards: b. s. and b. s.en d)- in engineering design concepts, types of loads and how they act are important factors. explain.

Answers: 3

continue

Do you know the correct answer?

A well in the Gulf of Mexico had a very long flow period (longer than the time to get out of transie...