Engineering, 12.10.2020 21:01, briibearr

Consider an ideal Brayton cycle for a jet engine consisting of a compressor, combustion chamber, turbine and nozzle. The pressure and temperature entering the compressor are 105 Pa and 300 K respectively. The pressure ratio across the compressor is 6 to 1, the temperature at the turbine inlet is 1000 K, and the pressure at the nozzle exit is 10 Pa Assume that cp remains constant through the engine at a value of 1000 J/kgK and y1.4 Calculate:
a) sure at the exit of the compressor.
b) Temperature at the exit of the compressor.
c Prssure at the exit of the combustion chamber
d) Temperature at the exit of the turbine.
e) ssure at the exit of the turbine.
f) Temperature at the exit of the nozzle.
g) Gas velocity at the exit of the nozzle.

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 15:10, brooklyn674

Apiston-cylinder with a volume of 0.25 m3 holds 1 kg of air (r 0.287 k/kgk) at a temperature of 100 c. heat transfer to the cylinder causes an isothermal expansion of the piston until the volume triples. how much heat is added to the piston-cylinder?

Answers: 3

continue

Engineering, 03.07.2019 15:10, theamandawhite

Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.

Answers: 1

continue

Engineering, 04.07.2019 18:10, keigleyhannah30

Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.

Answers: 3

continue

Engineering, 04.07.2019 18:20, sanchez626

Aheavily insulated piston-cylinder device contains 0.02 m3 of steam at 300 kpa and 200 °c. 1.2 mpa. d this process. team is now compressed in a reversible manner to a pressure of etermine the entropy change and the work done on the steam during this process

Answers: 1

continue

Do you know the correct answer?

Consider an ideal Brayton cycle for a jet engine consisting of a compressor, combustion chamber, tur...