Engineering, 05.10.2020 15:01, zaylelangaigne2006

A straight fin with a uniform circular cross-sectional geometry has a length L = 69 mm and diameter D = 4 mm. Convective
heat transfer occurs from all exposed surfaces including the
fin tip at a surrounding air temperature To = 30 °C and a
convective heat transfer cdefficient h = 11 W/(m2K). Fin
thermal conductivity is k = 60 W/(mK) and fin base
temperature is Tb = 70 °C. What is the fin efficiency? (Note:
Answer should be between 0 and 1.)

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, xboxdude06

Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.

Answers: 1

continue

Engineering, 04.07.2019 18:10, wyattlb97

Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?

Answers: 3

continue

Engineering, 04.07.2019 18:20, sarah7984

Vibration monitoring this technique uses the noise or vibration created by mechanical equipment and in seme cases by plant systems to detemine their actual condtion. a)- true b)- false

Answers: 2

continue

Engineering, 04.07.2019 18:20, luisgonz5050

Find the kinematic pressure of 160kpa. for air, r-287 j/ kg k. and hair al viscosity of air at a temperature of 50°c and an absolute (10 points) (b) find the dynamic viscosity of air at 110 °c. sutherland constant for air is 111k

Answers: 3

continue

Do you know the correct answer?

A straight fin with a uniform circular cross-sectional geometry has a length L = 69 mm and diameter...