Engineering, 24.09.2020 14:01, kaliyab191

A 4-liter sink has a drainage problem which limits its ability to drain water in the sink. Consider a case in which you turn on the sink faucet and the sink is half full of water the instant the sink is turned on. The faucet runs at 1 liter/min and the drain flow depends on the amount of mas in the tank, M, by the following expression: dM Mout 0.002M in g/s dt (a) Develop an expression for the mass of the water in the sink as a function of time.
(b) Convert part a to an expression that has fraction of the sink being full as a function of time.
(c) If there is no overflow protection drain, how many minutes will it take to have an overflow of water?

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 15:10, brooklyn674

Apiston-cylinder with a volume of 0.25 m3 holds 1 kg of air (r 0.287 k/kgk) at a temperature of 100 c. heat transfer to the cylinder causes an isothermal expansion of the piston until the volume triples. how much heat is added to the piston-cylinder?

Answers: 3

continue

Engineering, 04.07.2019 18:10, hadellolo8839

Acompressor receives the shaft work to decrease the pressure of the fluid. a)- true b)- false

Answers: 3

continue

Engineering, 04.07.2019 18:10, katelynn73

Atmospheric air has a temperature (dry bulb) of 80° f and a wet bulb temperature of 60° f when the barometric pressure is 14.696 psia. determine the specific humidity, grains/lb dry air. a. 11.4 c. 55.8 d. 22.5 b. 44.1

Answers: 1

continue

Engineering, 04.07.2019 18:20, luisgonz5050

Find the kinematic pressure of 160kpa. for air, r-287 j/ kg k. and hair al viscosity of air at a temperature of 50°c and an absolute (10 points) (b) find the dynamic viscosity of air at 110 °c. sutherland constant for air is 111k

Answers: 3

continue

Do you know the correct answer?

A 4-liter sink has a drainage problem which limits its ability to drain water in the sink. Consider...