Engineering, 24.09.2020 06:01, eyeneedalife

A continuous time system has an output, y, which is given by LaTeX: y(t) = 0.5t3 - 5y(t)=0.5t3−5 It is sampled at a frequency of LaTeX: 1 Hz1Hz . Determine the expression that correctly represents the discrete signal obtained after sampling and its value for n = 2. a. y(n) = 0.5n3 - 5, value at n = 2 is -1b. y(n)=0.5n3−5,valueatn=2is−1 LaTeX: y(n) = 1.7n2 – 0.35, value at n = 2 is -0.7568c. y(n)=1.7n2–0.35,valueatn=2is−0.7568 LaTeX: y(n) =5.6 n2 – 1.3, value at n = 2 is 0d. y(n)=5.6n2–1.3,valueatn=2is0 LaTeX: y(n) =0.5n2 - 7, value at n = 2 is -1

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, kayabwaller4589

When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point

Answers: 3

continue

Engineering, 04.07.2019 18:10, yasminothman02

An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet

Answers: 3

continue

Engineering, 04.07.2019 18:10, redrosesxx

Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux

Answers: 3

continue

Engineering, 04.07.2019 18:20, 1230bering

Select any two (2) areas of applications of chain-drive. (clo4) a)-permanent lubrication necessary b)-hydraulic forklift truck operation c)-rigging and heavy moving materials d)-relatively high maintenance costs e)-costlier than belt drives

Answers: 2

continue

Do you know the correct answer?

A continuous time system has an output, y, which is given by LaTeX: y(t) = 0.5t3 - 5y(t)=0.5t3−5 It...