Engineering, 22.09.2020 19:01, kathrynway2715
A steel pipe of 400-mm outer diameter is fabricated from 10-mm-thick plate by welding along a helix that forms an angle of 20° with a plane perpendicular to the axis of the pipe. Knowing that a 300-kN axial force P is applied to the pipe. Determine the normal and shearing stresses in directions respectively normal and tangential to the weld.
Answers: 1
![d_{0}=400 \mathrm{mm}[tex] Thickness of the cylinder [tex]t=10 \mathrm{mm}](/tpl/images/0776/3139/836e2.png)
![\therefore[tex] Inner diam eter [tex]d_{i}=d_{0}-2 t=400-2 \times 10](/tpl/images/0776/3139/2f34d.png)
Helix an gle of the weld form 
Other questions on the subject: Engineering
Engineering, 03.07.2019 15:10, theamandawhite
Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.
Answers: 1
Engineering, 04.07.2019 03:10, lauriepdx17
What precautions should you take to prevent injuries when dealing with heavy loads?
Answers: 1
Engineering, 04.07.2019 18:10, hadellolo8839
Acompressor receives the shaft work to decrease the pressure of the fluid. a)- true b)- false
Answers: 3
Engineering, 04.07.2019 18:10, sarahgrindstaff123
Afluid flows with a velocity field given by v=(x/t)i.. determine the local and convective accelerations when x=3 and t=1.
Answers: 2
Do you know the correct answer?
A steel pipe of 400-mm outer diameter is fabricated from 10-mm-thick plate by welding along a helix...
Questions in other subjects:
