Engineering, 22.09.2020 03:01, nimahmustafa

Mass spectral measurements were made on 10 replicate low concentration Cu-EDTA samples: 173.7 , 130.0 , 146.3 , 161.3 , 130.3 , 199.7 , 151.3 , 155.9 , 145.3 , and 162.9 counts. Ten measurements of a blank had a mean measurement of 25.1 counts. A sample containing 3.00 μM Cu-EDTA gave a measurement of 1679 counts. Estimate the signal and detection limit for Cu-EDTA. Signal detection limit: counts
Concentration detection limit: μM

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, 19deleonl

Coiled springs ought to be very strong and stiff. si3n4 is a strong, stiff material. would you select this material for a spring? explain.

Answers: 2

continue

Engineering, 04.07.2019 18:10, qwertylol12345

Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.

Answers: 2

continue

Engineering, 04.07.2019 18:10, redrosesxx

Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux

Answers: 3

continue

Engineering, 04.07.2019 18:10, ijohnh14

Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way

Answers: 2

continue

Do you know the correct answer?

Mass spectral measurements were made on 10 replicate low concentration Cu-EDTA samples: 173.7 , 130....