Engineering, 21.09.2020 02:01, genyjoannerubiera

Consider the tube and inlet conditions of Problem 1.30. Heat transfer at a rate of q = 3.89 MW is delivered to the tube. For an exit pressure of p = 8 bar, determine (a) the temperature of the water at the outlet as well as the change in
(b) combined thermal and fow work,
(c) mechanical energy, and
(d) total energy of the water from the inlet to the outlet of the tube.
Hint: As a first estimate, neglect the change in mechanical energy in solving part (a). Relevant properties may be obtained from a thermodynamics text

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 19:20, molly7654

Brief discuss how the presence of dislocations in crystal structures can be an advantage and a disadvantage to engineer and designers.

Answers: 3

continue

Engineering, 04.07.2019 19:20, carterdaw

Aseries piping system conveys methyl alcohol. the system consists of 70 m of 1- nominal pipe follow by 50 m of 2-nominal pipe, both schedule 40 commercial steel. the 1-nominal pipe contains 3 90° elbows (regular) anda fully open gate valve, all threaded. the pressure drop through the system is 150 kpa. determine the volume flow rate through the system that is horizontally laid.

Answers: 1

continue

Engineering, 04.07.2019 19:20, qurreab26

A5 kg block of fe is dropped into a very large vat of water. the fe and water initial temperatures are 95 and 25 c, respectively. the fe final temperature is 25 c and the water can be treated as a thermal reservoir,. treated as a thermal reservoir take the water to be the system and determine the entropy generation. report vour answer in kj/k.

Answers: 1

continue

Engineering, 06.07.2019 02:30, josediaz1124

Around steel bar, made from material with a yield stress of 750mpa, is loaded so that it has stresses co locations of maximum normal stress and maximum shear stress. use maximum shear stress and maximum distortion energy theories to calculate the safety factors for initial yielding failures.

Answers: 3

continue

Do you know the correct answer?

Consider the tube and inlet conditions of Problem 1.30. Heat transfer at a rate of q = 3.89 MW is de...