A 150 mm long tie rod in a car engine is loaded in uniaxial tension. The tie rod must not extend more than 1 mm under the maximum applied stress of 30 MPa. Specify a constraint for elastic modulus which can be used to screen out materials that cannot be used in this application. Assume that the tie rod material remains elastic at this level of stress.

Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.

Afluid flows with a velocity field given by v=(x/t)i.. determine the local and convective accelerations when x=3 and t=1.

Ahot wire operates at a temperature of 200°c while the air temperature is 20°c. the hot wire element is a tungsten wire of 5 um diameter and 2 mm in length. plot using excel current, heat transfer and heat generated by the wire for air velocity varying from 1-10 m/s in steps of lm/s? matlab the sensor voltage output, resistance, or assume nu 0.989 re033pr13 take air properties at tr (200°c20°c)/2 = 110°c properties of tungsten: c 0.13 kj/kg. k 3 p 19250 kg/m k (thermal conductivity) = 174 w/m. k