Engineering
Engineering, 04.09.2020 19:01, savidgarcia303

please help At corporate (business) organization level projects could be divided into broad two phases, the construction or development phase and operational or commercialization (commencement of operations) phase, therefore the project risk management process shall cover both phases of the project to ensure organization success. In this regards explain your own comprehension on the following points; 1. Project risk during construction phase (what type of risk will be assessed during this phase) 2. Project risk during operational or commercialization phase, (what type of risk will be assessed during this phase) 3. Which phase of project risk will be carrying higher weight (importance) for an organization, and why would you think so (give rationale).

answer
Answers: 3

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, niyawilliams23
Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10
Answers: 1
image
Engineering, 04.07.2019 18:10, redrosesxx
Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux
Answers: 3
image
Engineering, 04.07.2019 18:10, Candi9697
A-mn has a cubic structure with a0 0.8931 nm and a density of 7.47 g/cm3. b-mn has a different cubic structure, with a0 0.6326 nm and a density of 7.26 g/cm3. the atomic weight of manganese is 54.938 g/mol and the atomic radius is 0.112 nm. determine the percent volume change that would occur if a-mn transforms to b-mn.
Answers: 2
image
Engineering, 04.07.2019 19:10, netflixacc0107
What is the major difference between thermoplastics and thermosetting plastics from the polymerization structure point of view?
Answers: 2
Do you know the correct answer?
please help At corporate (business) organization level projects could be divided into broad two phas...

Questions in other subjects: