Engineering
Engineering, 27.08.2020 21:01, hardwick744

A man weighs 145 lb on earth. Part ASpecify his mass in slugs. Express your answer to three significant figures and include the appropriate units. Part BSpecify his mass in kilograms. Express your answer to three significant figures and include the appropriate units. Part CSpecify his weight in newtons. Express your answer to three significant figures and include the appropriate units. Part DIf the man is on the moon, where the acceleration due to gravity is gm = 5.30 ft/s2, determine his weight in pounds. Express your answer to three significant figures and include the appropriate units. Part EDetermine his mass in kilograms. Express your answer to three significant figures and include the appropriate units.

answer
Answers: 2

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, bckyanne3
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
image
Engineering, 04.07.2019 18:10, caitlynnpatton1208
Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.
Answers: 3
image
Engineering, 04.07.2019 19:10, Destinationz
Asteam is contained in a rigid tank with a volume of 1 m3. initially, the pressure and temperature are 7 bar and 500 oc, respectively. the temperature drops due to cooling process. determine: (1) the temperature at which condensation begins in °c, (2) the fraction of the total mass that has condensed when the pressure decreased to 0.5 bar. (3) the volume in m3 occupied by saturated liquid at the final state?
Answers: 3
image
Engineering, 04.07.2019 19:10, nani3906
Starting wih an energy balance on a rectangular volume element, derive the one- dimensional transient heat conduction equation for a plane wall with constant thermal conductivity and no heat generation.
Answers: 1
Do you know the correct answer?
A man weighs 145 lb on earth. Part ASpecify his mass in slugs. Express your answer to three signific...

Questions in other subjects: