Engineering
Engineering, 26.08.2020 23:01, alexiagreen1212

Multiple Unit Material balance problem A feed containing equimolar amounts of methanol and water is mixed with 10 moles of a 40 % mol aqueous methanol stream. The mixture enters a first separation unit that creates two streams. A top stream exits the separation unit that contains 70 % mol methanol and rest water. The bottom stream, which is 70 moles enters a second separation unit. A top stream exists the second separation unit as a 50 % methanol & 50 % water mixture. The other stream is unknown. If the fresh feed to the system is 100 moles (equimolar mixture) and the two top streams exiting the separation units have the same flow, draw the flow sheet and find the molar flow and the composition of the bottom streams existing the second separation unit?

answer
Answers: 1

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:20, maustin5323
Athin walled concentric tube exchanger is used to cool engine oil from 160°c to 60°c with water that is available at 25°c acting as a coolant. the oil and water flow rates are each at 2 kg/s, and the diameter of the inner tube is 0.5 m and the corresponding value of the overall heat transfer coefficient is 250 w/m2. oc. how long must the heat exchanger be to accomplish the desired cooling? cpwater=4.187 kj/kg-candcpengine el=2.035 kj/kg·°c, oil . 120]
Answers: 1
image
Engineering, 04.07.2019 18:20, kendrawalraven
The characteristic roots of a dynamic system are: 1.7920 1.8160 i, -1.7920 1.8160 i, -0.4160 what is the order of this system? what are the settling time and damping ratio of the system?
Answers: 3
image
Engineering, 04.07.2019 18:20, aly95
An engine runs on the ideal diesel cycle. the cycle has a compression ratio of 20 and a cutoff ratio of 2. the highest temperature in the cycle is 1200 k. if the heat into the system is 300 kj/kg of working fluid and using variable specific heats determine the work produced per mass of working fluid
Answers: 3
image
Engineering, 04.07.2019 19:10, nani3906
Starting wih an energy balance on a rectangular volume element, derive the one- dimensional transient heat conduction equation for a plane wall with constant thermal conductivity and no heat generation.
Answers: 1
Do you know the correct answer?
Multiple Unit Material balance problem A feed containing equimolar amounts of methanol and water is...

Questions in other subjects:

Konu
Mathematics, 14.08.2021 05:20