Engineering, 26.08.2020 17:01, ineedhelp2285

63 + 216 Ω ∅ ⁄ empedansına sahip dengeli ∆ bağlı bir yük 50∠0° Ω ∅ ⁄ empedansına sahip dengeli bağlı bir yüke parallel bağlıdır. Paralel yükler 1 + 3 Ω ∅ ⁄ empedansına sahip bir hattan beslenmektedir. Bağlı yükün hattan nötr'e geliminin büyüklüğü 750 'tur. a) Yükleri besleyen hattaki akımın büyüklüğünü hesaplayınız? b) Hattın gönderici ucundaki faz geriliminin büyüklüğünü hesaplayınız? c) Kaynaklar tarafından sağlanan toplam görünür, ortalama ve reaktif güçleri bulunuz?

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, bckyanne3

Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.

Answers: 1

continue

Engineering, 04.07.2019 18:10, jojoangelique13

The flow rate of air through a through a pipe is 0.02 m5/s. a pitot static tube is placed in the flow. the radius of the pitot static tube is 1 mm. assuming the flow to be steady and the air to be at 300k, calculate the difference in total and static pressure if the diameter of the pipe is: (a) d 0.1 m d 0.05 m (c) d 0.01 m

Answers: 2

continue

Engineering, 04.07.2019 18:20, yasyyas646646

Agas mixture consists of 8 kmol of h2 and 2 kmol of n2. determine the mass of each gas and the apparent gas constant of the mixture.

Answers: 3

continue

Engineering, 04.07.2019 18:20, rhussein6452

Wiy doeres rere okhn a pump whon working betwon the same pressure range?

Answers: 2

continue

Do you know the correct answer?

63 + 216 Ω ∅ ⁄ empedansına sahip dengeli ∆ bağlı bir yük 50∠0° Ω ∅ ⁄ empedansına sahip dengeli bağlı...