Engineering, 20.08.2020 18:01, zasxdcfvg5868
You are stopped at a red traffic light and are first in line at the intersection. When the traffic light changes to green, you should
Accelerate quickly up to the speed limit.
Go, regardless of other traffic. You have the right-of-way.
Go, but only if the intersection is clear. Yield to pedestrians and vehicles still in the intersection.
Answers: 3
Engineering, 04.07.2019 16:10, TheOriginalMeyah
An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)
Answers: 2
Engineering, 04.07.2019 18:10, wirchakethan23
Hydraulic fluid with a sg. of 0.78 is flowing through a 1.5 in. i. d. pipe at 58 gal/min. the fluid has an absolute viscosity of 11.8 x 105 lbf-sec/ft2. is the flow laminar, turbulent or within the critical range? give both a numerical reynolds number and a term answer.
Answers: 3
Engineering, 04.07.2019 18:10, 0436500
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
You are stopped at a red traffic light and are first in line at the intersection. When the traffic l...
Mathematics, 13.09.2019 17:30
Biology, 13.09.2019 17:30
Mathematics, 13.09.2019 17:30
Geography, 13.09.2019 17:30