Engineering, 15.08.2020 14:01, brainbean

An employee is required to unload 30 cm cardboard cubes from a pallet (15 cm thickness) and place them on a conveyor that is 80 cm high. The cartoons are unloaded at 6 cartons per minute. Each pallet has one layer of cartons containing 16 cartons. The operation requires the worker to twist approximately 900 while turning to unload the cartoon on to the conveyor. A maximum of twelve pallets are unloaded during the first hour of each shift (the activity takes place only once per shift). Find the recommended weight limit for the activity.

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, mm016281

What difference(s) did you notice using a pneumatic circuit over hydraulic circuit. explain why the pneumatic piston stumbles when it hits an obstacle.

Answers: 2

continue

Engineering, 04.07.2019 18:10, skpdancer1605

Ariver flows from north to south at 8 km/h. a boat is to cross this river from west to east at a speed of 20 km/h (speed of the boat with respect to the earth/ground). at what angle (in degrees) must the boat be pointed upstream such that it will proceed directly across the river (hint: find the speed of the boat with respect to water/river)? a 288 b. 21.8 c. 326 d. 30.2

Answers: 3

continue

Engineering, 04.07.2019 18:10, Strick1530

Which of the following components of a pid controlled accumulates the error over time and responds to system error after the error has been accumulated? a)- proportional b)- derivative c)- integral d)- on/off.

Answers: 2

continue

Engineering, 04.07.2019 18:10, katelynn73

Atmospheric air has a temperature (dry bulb) of 80° f and a wet bulb temperature of 60° f when the barometric pressure is 14.696 psia. determine the specific humidity, grains/lb dry air. a. 11.4 c. 55.8 d. 22.5 b. 44.1

Answers: 1

continue

Do you know the correct answer?

An employee is required to unload 30 cm cardboard cubes from a pallet (15 cm thickness) and place th...