Engineering, 15.08.2020 02:01, kaelycaetano66

A single-threaded 25-mm power screw hasa pitch of 5 mm. The frictional diameter of the collar is 45 mm. The max load onvertical direction of the screw is5kN. The collar has a coefficients of friction of0.06, and he threads hasa coefficients of friction of0.09. Find the overall efficiency and the torque to "raise" and "lower" the load.

Answers: 2

Show answers

Answers

answered: iris7324

torque to raise the load = 16.411 Nm

torque to lower the load = 8.40 Nm

overall efficiency = 0.24

Explanation:

Given:

max load on vertical direction of the screw = Force = F = 5kN

frictional diameter of the collar = 45 mm

Diameter = 25 mm

length of pitch = 5 mm

coefficient of friction for thread µ = 0.09

coefficient of friction for collar µ $_{c}$ = 0.06

To find:

torque to "raise" the load

torque to and "lower"

overall efficiency

Solution:

Compute torque to raise the load:

$T_{R} = \frac{ Fd_{m}}{2} (\frac{L+(\pi ud_{m}) }{\pi d_{m}-uL }) +\frac{Fu_{c} d_{c} }{2}$

where

$T_{R}$ is the torque

F is the load

$d_{m}$ is diameter of thread

$d_{c}$ is diameter of collar

L is the thread pitch distance

µ is coefficient of friction for thread

µ $_{c}$ is coefficient of friction for collar

Putting the values in above formula:

$T_{R}$ = 5(25) / 2 [5+ (π(0.09)(25) / π(25)-0.09(5)] + 5(0.06)(45) / 2

= 125/2 [5 + (3.14)(0.09)(25)/ 3.14(25)-0.45] + 13.5/2

= 62.5 [(5 + 7.065) / 78.5 - 0.45] + 6.75

= 62.5 [12.065 / 78.05 ] + 6.75

= 62.5 (0.15458) + 6.75

= 9.66125 + 6.75

= 16.41125

$T_{R}$ = 16.411 Nm

Compute torque to lower the load:

$T_{L} = \frac{ Fd_{m}}{2} (\frac{(\pi ud_{m}) - L }{\pi d_{m}-uL }) +\frac{Fu_{c} d_{c} }{2}$

= 5(25) / 2 [ (π(0.09)(25) - L / π(25)-0.09(5) ] + 5(0.06)(45) / 2

= 125/2 [ ((3.14)(0.09)(25) - 5) / 3.14(25)-0.45 ] + 13.5/2

= 62.5 [ (7.065 - 5) / 78.5 - 0.45 ] + 6.75

= 62.5 [ 2.065 / 78.05 ] + 6.75

= 62.5 (0.026457) + 6.75

= 1.6535625 + 6.75

= 8.40 Nm

Since the torque required to lower the the load is positive indicating that an effort is applied to lower the load, Hence the thread is self locking.

Compute overall efficiency:

overall efficiency = F(L) / 2π $T_{R}$

= 5(5) / 2(3.14)( 16.411)

= 25/ 103.06108

overall efficiency = 0.24

answered: Guest

the warning light flashes for a second or two when the engine starts. if it stays on, there's must be something wrong with the coolant. you should never dare to continue driving when the light is on. pull over as soon as possible and shut the engine off.

hope this is what you're talking about

answered: Guest

answer:

what

explanation:

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, heidiburgos1own6c0

Fluids at rest possess no flow energy. a)- true b)- false

Answers: 3

continue

Engineering, 04.07.2019 18:10, 19deleonl

Coiled springs ought to be very strong and stiff. si3n4 is a strong, stiff material. would you select this material for a spring? explain.

Answers: 2

continue

Engineering, 04.07.2019 18:10, keigleyhannah30

Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.

Answers: 3

continue

Engineering, 04.07.2019 18:10, jesuslovesusall3

Courses that are developed by subject matter experts, internal or extemal to the college or university. these programs are marketed by the school (clo2) marks a)-vocational schools b)-vendor training c)-colleges & universities d)-continuing education programs

Answers: 2

continue

Do you know the correct answer?

A single-threaded 25-mm power screw hasa pitch of 5 mm. The frictional diameter of the collar is 45...