Engineering, 13.08.2020 05:01, charity56
A gas mixture is found to contain two diatomic A and B species (A2 and B2), the partial pressures of both of which are 0.1013 MPa (1 atm). This mixture is to be enriched in the partial pressure of the A species by passing both gases through a thin sheet of some metal at an elevated temperature. The resulting enriched mixture is to have a partial pressure of 0.051 MPa (0.5 atm) for gas A and 0.0203 MPa (0.2 atm) for gas B. The concentrations of A and B (CA and CB, in mol/m3 ) are functions of gas partial pressures (pA2 and pB2, in MPa) and absolute temperature according to the following expressions:
CA =1.5Γ10^3 pA 2 exp(β RT20,000J/mol)
CB =2.0Γ10^3 pB 2 exp(β RT27,000J/mol)
Furthermore, the diffusion coefficients for the diffusion of these gases in the metal are functions of the absolute temperature, as follows:
DA(m2/s)=5.0Γ10β7exp(β13,000J/molRT )
DB(m2/s)=3.0Γ10β6exp(β21,000J/molRT )
Is it possible to purify gas A in this manner? If so, specify a temperature at which the process may be carried out, and also the thickness of metal sheet that would be required. If this procedure is not possible, then state the reason(s) why.
Answers: 2
Engineering, 04.07.2019 18:10, yasminothman02
An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15Β°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet
Answers: 3
Engineering, 04.07.2019 18:10, lowkeyqueenk
Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20Β°c. the pipe has an outer surface temperature of 65Β°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk
Answers: 1
Engineering, 04.07.2019 18:20, 1230bering
Select any two (2) areas of applications of chain-drive. (clo4) a)-permanent lubrication necessary b)-hydraulic forklift truck operation c)-rigging and heavy moving materials d)-relatively high maintenance costs e)-costlier than belt drives
Answers: 2
Engineering, 04.07.2019 18:20, hayleymckee
Steam enters a converging nozzle at 3.0 mpa and 500Β°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent
Answers: 2
A gas mixture is found to contain two diatomic A and B species (A2 and B2), the partial pressures of...
English, 26.11.2020 14:00
Mathematics, 26.11.2020 14:00
Physics, 26.11.2020 14:00
Mathematics, 26.11.2020 14:00
Physics, 26.11.2020 14:00
Chemistry, 26.11.2020 14:00
English, 26.11.2020 14:00
Mathematics, 26.11.2020 14:00