Engineering, 12.08.2020 09:01, tashai3138

Technician A says that when the malfunction indicator light or service engine light is on you should retrieve the diagnostic trouble code and follow the manufacturers recommended procedure. Technician B says that all obd-ll monitors must have the enabled criteria achieved before a test is performed. Who is correct?

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 06.07.2019 03:10, betru12315

How to convert a friction to decimal ?

Answers: 1

continue

Engineering, 06.07.2019 04:20, madisontaegarmatus

Two microscope slides are placed horizontally, one on top of the other, with a drop of a dishwashing liquid between them. the gap between the slides is 1 mm. a machine pulls the top slide to the right with a velocity of 0.15 millimeters per second while the bottom slide is held stationary. a stress gage indicates that a shearing stress of 0.5 pa is required to pull the top slide with this velocity. if the dishwashing liquid adheres to both slides during this process, what is the viscosity of the liquid? specify whether your answer is dynamic or kinematic viscosity, and use appropriate units.

Answers: 1

continue

Engineering, 06.07.2019 04:30, jasmin5285

List five instruments for angular measurement and explain one of them witlh appropriate diagram(s)

Answers: 1

continue

Engineering, 06.07.2019 05:10, ruslffdr

An electric cable of 10 mm in diameter is to laid in atmosphere at 20°c. the estimated surface temperature of the cable due to heat generation is 65°c. find out ther maximum percentage, increese in heat dissipated when the wire is insulated with rubber having k =0155 w/m-k. take h=8.5w/m^2.k

Answers: 2

continue

Do you know the correct answer?

Technician A says that when the malfunction indicator light or service engine light is on you should...