Engineering
Engineering, 12.08.2020 08:01, NeonPlaySword

A mixture of five (5) components are to be separated via four (4) unit operations. Below mention table shows the flow rate of each component, and the split ratio of the substances at each unit operation. a. Discuss your strategy to obtain the highest purity of substance A based on mass transfer and separation process principles.
b. Draw one (l) possible arrangements Of the separator to accomplish the objective in (a) in the form of a process now diagram
c. Estimate the purity of substance A in percentage (%)
d. If the final separator used to obtain the high purity substance A in (b) is a distillation column, estimate the minimum number of stages when the binary system is benzene- toluene.
e. If the final separator used to obtain the high purity substance A in (b) is a membrane column, determine the effects of varying the feed pressure on the mass flux of substance A across the membrane. Discuss your answer with relation to mass transfer principles. Take the permeability (g/m^2.min. atm) equals to the separation factor, and the pressure drop across the membrane to be only 2% of the feed pressure. Choose your own range of feed pressure.

Substance Flow rate (g/min) Separator 1 Separator 2 Separator 3 Separator 4
A 50 0.01 0.55 0.03 0.45
B 34 0.45 0.07 0.01 0.9
C 100 0.8 0.5 0.02 0.70
D 26 0.6 0.06 0.015 0.1
E 17 0.4 0.6 0.7 0.6

answer
Answers: 2

Other questions on the subject: Engineering

image
Engineering, 03.07.2019 15:10, theamandawhite
Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.
Answers: 1
image
Engineering, 04.07.2019 18:10, Tyrant4life
Draw the engineering stress-strain curve for (a) bcc; (b) fcc metals and mark important points.
Answers: 1
image
Engineering, 04.07.2019 18:20, 21megoplin
How much power could a wind turbine produce if it had the following specifications? cp = 0.45 -d=1.2kg/m3 d=50m v 5m/s
Answers: 2
image
Engineering, 04.07.2019 19:10, ultimateapes
When subject to a steady load (within elastic range) over a long period of time, what is the major difference in material behavoir between steel and plastic?
Answers: 2
Do you know the correct answer?
A mixture of five (5) components are to be separated via four (4) unit operations. Below mention tab...

Questions in other subjects: