Engineering
Engineering, 12.08.2020 05:01, josephvcarter

A dehumidifier receives air with a 60% relative humidity at 300 K, 1 bar, and the dehumidifier releases air at 287.6 K, 1 bar, and 90% relative humidity. The volumetric flow rate of air in the dehumidifier is 4.72 m3/min. The dried air then mixes with a wet air stream at 308.5 K, 1 bar, and 47% relative humidity with a 55 m3/min volumetric flow rate in an insulated chamber. Ignoring heat losses and changes in kinetic and potential energy, determine: The rate of water condensation in the dehumidifier, in kg/h The temperature and relative humidity of the exit air stream from the chamber.

answer
Answers: 1

Other questions on the subject: Engineering

image
Engineering, 03.07.2019 14:10, cowgyrlup124
Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.
Answers: 1
image
Engineering, 03.07.2019 14:10, kayabwaller4589
When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point
Answers: 3
image
Engineering, 03.07.2019 14:10, volleyballfun24
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
image
Engineering, 03.07.2019 15:10, EmilySerna
Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.
Answers: 1
Do you know the correct answer?
A dehumidifier receives air with a 60% relative humidity at 300 K, 1 bar, and the dehumidifier relea...

Questions in other subjects: