Which one of the following is NOT a method of universal motor speed control? A: Tapped field windings with a switch selector.
B: Varying the voltage using semiconductor devices.
C: Dynamic braking of the motor's shaft
D: Using an adjustable centrifugal switch in parallel with a resistor

The y form of iron is known as: a) ferrite b) cementite c) perlite d) austenite

Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10

Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way