Engineering, 12.08.2020 07:01, jeffcarpenter

A thermocouple junction with a diffuse and gray surface (A_S = 0.2 m^2) is placed in a large environment of temperature at 300 K. The junction is used to measure the temperature of a moving fluid surrounding the surface (T_infinity). The heat transfer coefficient is h = 20 W/m^2-K. The total hemispherical irradiation from the environment incident on the small surface is 460 W/m^2. The total hemispherical emissivity of the surface is 0.95. Required:
a. What is the radiation energy incident on the surface per unit time (q_irra)?
b. What is the total hemispherical absorptivity alpha?
c. What is the radiation energy absorbed by the surface per unit time q_abs?
d. If after steady state, the temperature of the junction senses a temperature of 320 K, what is the total hemispherical emitted power E from the junction surface?
e. What is the radiation energy emitted from the junction surface per unit time q_emit?
g. Apply energy balance to the junction after steady state. Neglect the contribution from the thermocouple wires. Calculate the temperature of the fluid. What is the major reason that the temperature of the fluid cannot be accurately measured by the thermocouple junction?

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 08:10, doggo242

Which of the following is an easy way to remember the modified “x” tire rotation? a. nondrive wheels straight, cross the drive wheels b. drive wheels straight, cross the nondrive wheels c. drive wheels crossed, nondrive wheels straight d. drive wheels crossed, nondrive wheels crossed

Answers: 1

continue

Engineering, 04.07.2019 18:10, DestyHilBan1183

Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.

Answers: 3

continue

Engineering, 04.07.2019 18:10, jojoangelique13

The flow rate of air through a through a pipe is 0.02 m5/s. a pitot static tube is placed in the flow. the radius of the pitot static tube is 1 mm. assuming the flow to be steady and the air to be at 300k, calculate the difference in total and static pressure if the diameter of the pipe is: (a) d 0.1 m d 0.05 m (c) d 0.01 m

Answers: 2

continue

Engineering, 04.07.2019 18:10, tobyhollingsworth178

Which from the following instrument is commonly used to detect the high pitch butzing sound in bearings? [clo4] a)-digital ultrasonic meter b)-infrared camera c)-spectroscopic d)-vibrometer

Answers: 2

continue

Do you know the correct answer?

A thermocouple junction with a diffuse and gray surface (A_S = 0.2 m^2) is placed in a large environ...