Engineering, 12.08.2020 06:01, micahwilkerson8344

A Brayton cycle gas engine is analyzed using the air standard method. Given the conditions at state 1, pressure ratio (rp), and cutoff ratio (rc) determine the efficiency and other values listed below. The specific heat ratio and gas constant for air are given as k= 1.4 and R= 0.287 kJ/kg-K respectively. —Given Values--
T1 (K) =310
P1 (kPa)= 161
rp = 9.2
Rc=2.21
AV (m3/s) = 5

a. Determine the specific enthalpy (kJ/kg) at state 1.
b. Determine the relative pressure at state 1.
c. Determine the relative pressure at state 2.
d. Determine the temperature (K) at state 2.

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, cowgyrlup124

Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.

Answers: 1

continue

Engineering, 03.07.2019 14:10, kayabwaller4589

When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point

Answers: 3

continue

Engineering, 04.07.2019 18:10, xboxdude06

Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.

Answers: 1

continue

Engineering, 04.07.2019 18:10, QueenLife4869

Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.

Answers: 3

continue

Do you know the correct answer?

A Brayton cycle gas engine is analyzed using the air standard method. Given the conditions at state...