Engineering, 15.07.2020 01:01, Jasten

1. What is the Hardness (HB) of each of the alloys?a) 0.25 wt%C with spheroiditeb) 0.25 wt%C with coarse pearlitec) 0.60 wt%C with fine pearlited) 0.60 wt%C with coarse pearlite. The tolerance to all answers is +/- 10 %.1. 1152. 1353. 2204. 1852. Based on the hardness values determined in Part 1, what is the tensile strength (in MPa) for each of the alloys? a) 0.25 wt%C with spheroiditeb) 0.25 wt%C with coarse pearlitec) 0.60 wt%C with fine pearlited) 0.60 wt%C with coarse pearlite. The tolerance to all answers is +/- 10 %.1) 1162) 1383) 2314) 191

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, soreese02

An ideal otto cycle with air as the working fluid has a compression ratio of 8. the minimum and maximum temperatures in the cycle are 300 k and 1340 k. use constant specific heats at room temperature to determine (a) the amount of heat transferred to the air during the heat- addition kj/kg, (b) the thermal efficiency, and (c) the thermal efficiency of a carnot cycle ope limits. process, in rating between the same temperature

Answers: 2

continue

Engineering, 04.07.2019 18:20, ashleyjaslin

Derive the correction factor formula for conical nozzle i=-(1+ cosa) and calculate the nozzle angle correction factor for a nozzle whose divergence hal-fangle is 13 (hint: assume that all the mass flow originates at the apex of the cone.

Answers: 3

continue

Engineering, 04.07.2019 18:20, mjcbs21

What is the heat treatment of metals? what is the benefit of it? why and how it's useful? answer in details, do not write by hand.

Answers: 3

continue

Engineering, 04.07.2019 18:20, cdyshaylia55

Water vapor initially at 10 bar and 400 °c is contained within a piston-cylinder assembly. the water lost heat to the surrounding according to isochoric (iso-volumetric) process until its temperature is 150 °c. the water is then condensed isothermally to saturated liquid. for the water as a system, calculate the work in kj/kg

Answers: 2

continue

Do you know the correct answer?

1. What is the Hardness (HB) of each of the alloys?a) 0.25 wt%C with spheroiditeb) 0.25 wt%C with co...