Engineering
Engineering, 13.07.2020 23:01, jjhagan22

Aggregate blend composed of 65% coarse aggregate (SG 2.701), 35% fine aggregate (SG 2.625) Compacted specimen weight in air = 1257.9 g, submerged weight = 740.0 g, SSD weight = 1258.7 g
Compacted specimen contains 5.0% asphalt by total weight of the mix with Gb = 1.030
Theoretical maximum specific gravity = 2.511
Bulk specific gravity of the aggregate
Bulk specific gravity of the compacted specimen
Percent stone
Effective specific gravity of the stone
Percent voids in total mix
Percent voids in mineral aggregate
Percent voids filled with asphalt

answer
Answers: 1

Other questions on the subject: Engineering

image
Engineering, 03.07.2019 14:10, bryneosburn
Line joining liquid phase with liquid and solid phase mixture is known as: a) liquidus b) solidus c) tie line d) none of the mentioned
Answers: 2
image
Engineering, 04.07.2019 18:10, ashleybaber4966
If a particle moves along a path such that r : (3 sin t) m and ? : 2t rad, where t is in seconds. what is the particle's acceleration in m/s in 4 seconds? a)- 16.43 b)- 16.29 c)- 15.21 d)- 13.79
Answers: 1
image
Engineering, 04.07.2019 18:10, redrosesxx
Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux
Answers: 3
image
Engineering, 04.07.2019 18:10, wyattlb97
Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?
Answers: 3
Do you know the correct answer?
Aggregate blend composed of 65% coarse aggregate (SG 2.701), 35% fine aggregate (SG 2.625) Compacte...

Questions in other subjects: