Engineering, 04.07.2020 14:01, abrito1559

A simiply supported composite beam is made of Segment A and Segment B. Segmanet A of the composite beam is 2014-T6 aluminum alloy and Segment B is A-36 steel. If the distributed loading intensity w = 0.9 kips/ft, (1) determine the absolute maximum bending stress developed in the aluminum and steel, respectively; (2) Sketch the stress distribution on the cross section. The modulus of aluminum alloy is 10.6 × 106 psi, and the modulus of steel is 29 × 106 psi.

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, bryneosburn

Line joining liquid phase with liquid and solid phase mixture is known as: a) liquidus b) solidus c) tie line d) none of the mentioned

Answers: 2

continue

Engineering, 03.07.2019 14:10, volleyballfun24

If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.

Answers: 3

continue

Engineering, 03.07.2019 15:10, brooklyn674

Apiston-cylinder with a volume of 0.25 m3 holds 1 kg of air (r 0.287 k/kgk) at a temperature of 100 c. heat transfer to the cylinder causes an isothermal expansion of the piston until the volume triples. how much heat is added to the piston-cylinder?

Answers: 3

continue

Engineering, 04.07.2019 18:10, viicborella

Steel is coated with a thin layer of ceramic to protect against corrosion. what do you expect to happen to the coating when the temperature of the steel is increased significantly? explain.

Answers: 1

continue

Do you know the correct answer?

A simiply supported composite beam is made of Segment A and Segment B. Segmanet A of the composite b...