Engineering, 02.07.2020 14:01, 2Dgames
A specimen of a 4340 steel alloy with a plane strain fracture toughness of 54.8 MPa (50 ksi ) is exposed to a stress of 2023 MPa (293400 psi). Assume that the parameter Y has a value of 1.14. (a) If the largest surface crack is 0.2 mm (0.007874 in.) long, determine the critical stress .
Answers: 1
Engineering, 04.07.2019 18:10, 0436500
Aturning operation is performed with following conditions: rake angle of 12Β°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Engineering, 04.07.2019 18:20, 1230bering
Select any two (2) areas of applications of chain-drive. (clo4) a)-permanent lubrication necessary b)-hydraulic forklift truck operation c)-rigging and heavy moving materials d)-relatively high maintenance costs e)-costlier than belt drives
Answers: 2
Engineering, 04.07.2019 19:10, Mimidj9279
The sum of the normal stresses does not change as the stress state rotates through an angle. a)-trune b)- false
Answers: 2
Engineering, 04.07.2019 19:10, phantomlizz3233
In general, how do thermosetting plastics compare to thermoplastics in mechanical and physical properties?
Answers: 3
A specimen of a 4340 steel alloy with a plane strain fracture toughness of 54.8 MPa (50 ksi ) is exp...
Mathematics, 24.02.2020 20:40
History, 24.02.2020 20:40