Engineering
Engineering, 27.06.2020 19:01, armon15

An angular-contact, inner ring rotating, 02-series ball bearing is required for an application in which the life requirement is 37 kh at 540 rev/min. The design radial load is 725 lbf. The application factor is 1.4. The reliability goal is 0.93. For a C10 value of 63.7 kN, what is the reliability using the design factor, force, speed, and desired life from part a? The reliability is:.

answer
Answers: 2

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 03:10, lauriepdx17
What precautions should you take to prevent injuries when dealing with heavy loads?
Answers: 1
image
Engineering, 04.07.2019 16:10, TheOriginalMeyah
An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)
Answers: 2
image
Engineering, 04.07.2019 18:10, sarahgrindstaff123
Afluid flows with a velocity field given by v=(x/t)i.. determine the local and convective accelerations when x=3 and t=1.
Answers: 2
image
Engineering, 04.07.2019 18:10, xboxdude06
Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.
Answers: 1
Do you know the correct answer?
An angular-contact, inner ring rotating, 02-series ball bearing is required for an application in wh...

Questions in other subjects: