Engineering
Engineering, 26.06.2020 16:01, deannajd03

A surveyor is trying to find the height of a hill . he/she takes a sight on the top of the hill and find that the angle of elevation is 40°. he/she move a distance of 150 metres on level ground directly away from the hill and take a second sight. from this point the angl. e of elevation is 22°. find the height of the hill

answer
Answers: 1

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, samanthabutryn
Which one from below is not one of the reasons of planning failures? (clo3) a)-planner is careless. b-planner spend less time in the field but more time on the desk c)-planner is not qualified d)-planner does not have sufficient time to properly plan
Answers: 3
image
Engineering, 06.07.2019 04:20, coolstacie
What is the fuid acceleration in vector form for the following velocity field? note i, j, and k are unit vectors. show all of your work.
Answers: 1
image
Engineering, 06.07.2019 05:20, yoyo2697
An ideal rankine cycle with reheat uses water as the working fluid. the conditions at the inlet to the high pressure turbine are 10mpa, 650°c and the steam is reheated at a constant pressure of 1.4mpa before entering the low pressure turbine. for a condenser pressure of 10kpa, plot the cycle thermal efficiency and quality of steam at the low pressure turbine exit versus reheat temperatures (the temp of steam entering the low pressure turbine) of 400, 500, and 600°c. draw the t-s diagram and show all your work for a reheat temperature of 400°c .note, there will be two plots. one with thermal efficiency on in the ordinate versus reheat temperate and the other will have quality on the ordinate versus reheat temperature. be sure to label all axes with variables and units and include title. the plots must be done on computer.
Answers: 2
image
Engineering, 06.07.2019 05:20, kutubmia
The 10lb block has an initial velocity of 10 ft/s on the smooth plane. if a force f (2.5 t) lb, where t is in seconds, acts on the block for 3 s, determine the final velocity of the block and the distance the block travels during this time.
Answers: 3
Do you know the correct answer?
A surveyor is trying to find the height of a hill . he/she takes a sight on the top of the hill and...

Questions in other subjects:

Konu
Mathematics, 17.11.2020 21:10
Konu
Mathematics, 17.11.2020 21:10
Konu
History, 17.11.2020 21:10
Konu
Business, 17.11.2020 21:10