Engineering, 24.06.2020 02:01, skatingflower

Draw a fourbar linkage with L1 = 10 cm, L2 = 3 cm L3 = 6 cm and L4 = 6 cm, with LaTeX: \theta_2θ 2= 45o. Consider both configurations in your drawing, namely the open and closed. Measure your transmission angles and indicate which is which. Do you see a difference in values?

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, skpdancer1605

Ariver flows from north to south at 8 km/h. a boat is to cross this river from west to east at a speed of 20 km/h (speed of the boat with respect to the earth/ground). at what angle (in degrees) must the boat be pointed upstream such that it will proceed directly across the river (hint: find the speed of the boat with respect to water/river)? a 288 b. 21.8 c. 326 d. 30.2

Answers: 3

continue

Engineering, 04.07.2019 18:20, karatsgrande3772

Determine the damped natural frequencies and the steady state response of a decoupled damped forced two degrees of freedom system. 10ä1 + 2q1 20q1 10 cos t; 10q2 +4q2 + 40q2 10 cos t

Answers: 3

continue

Engineering, 04.07.2019 18:20, rjone8429

Asimple rankine cycle uses water as the working fluid. the water enters the turbine at 10 mpa and 480c while the condenser operates at 6 kpa. if the turbine has an isentropic efficiency of 80 percent while the pump has an isentropic efficiency of 70 percent determine the thermal efficiency

Answers: 1

continue

Engineering, 04.07.2019 19:10, kimmy6973

What is creep? what is stress relaxation?

Answers: 1

continue

Do you know the correct answer?

Draw a fourbar linkage with L1 = 10 cm, L2 = 3 cm L3 = 6 cm and L4 = 6 cm, with LaTeX: \theta_2θ 2=...