Engineering, 22.06.2020 18:57, emilycolley2
A 100 kmol/h stream that is 97 mole% carbon tetrachloride (CCL) and 3% carbon disulfide (CS2) is to be recovered from the bottom of a distillation column. The feed to the column is 16 mole% CS2 and 84% CC14, and 2% of the CC14 entering the column is contained in the overhead stream leaving the top of the column. (a) Draw and label a flowchart of the process and do the degree-of-freedom analysis. (b) Calculate the mass and mole fractions of CCl4 in the overhead stream, and determine the molar flow rates of CCl4 and CS2 in the overhead and feed streams. (c) Suppose the overhead stream is analyzed and the mole fraction of CS2 is found to be significantly lower than the value calculated in Part (b). List as many reasons as you can for the discrepancy, including possible violations of assumptions made in Part (b).
Answers: 1
Other questions on the subject: Engineering
Engineering, 04.07.2019 19:10, jimena15
10 kg of co2 is initially contained at 400 kpa and 300 k. the gas constant for carbon dioxide is 189 j/lkg k) and has a specific heat ratio, k, of 1.289. isentropic expansion then occurs until the pressure is 200 kpa. a) determine the initial volume of co2 in m. b) determine the final temperature in k. c) determine the work done by the system during the expansion kl.
Answers: 2
Engineering, 05.07.2019 10:10, johns2380
What is the correct way to measure the overall length of a boat? measure from the tip of the bow to the highest point on the gunwale. measure from the tip of the bow in a straight line to the stern of the boat. measure from the tip of the bow in a straight line to the back seat. measure from port to starboard at the boat's widest point.
Answers: 1
Do you know the correct answer?
A 100 kmol/h stream that is 97 mole% carbon tetrachloride (CCL) and 3% carbon disulfide (CS2) is to...
Questions in other subjects:
