Engineering
Engineering, 23.06.2020 18:01, taijaunam

A closed system consisting of 4 lb of a gas undergoes a process during which the relation between pressure and volume is pV^n = constant. The process begins with p1=15lbf/in.2, v1=1.25ft3/lband ends with p2=53lbf/in.2, v2=0.5 ft3/lb. Determine
(a) the volume, in ft^3, occupied by the gas at states 1 and 2 and
(b) the value of n.
(c) Sketch Process 1-2 on pressure-volume coordinates. Is this an expansion or compression process? Explain?
-1 pt. for Givens/Known:
-1 pt. for Find: - 3 pts. for part A
- 2 pts. for part B
- 2 pts. for correctly libelled pV diagram.
-1 pt. for identifying process

answer
Answers: 2

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, niyawilliams23
Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10
Answers: 1
image
Engineering, 04.07.2019 18:10, siri5645
At 12 noon, the count in a bacteria culture was 400; at 4: 00 pm the count was 1200 let p(t) denote the bacteria cou population growth law. find: (a) an expression for the bacteria count at any time t (b) the bacteria count at 10 am. (c) the time required for the bacteria count to reach 1800.
Answers: 1
image
Engineering, 04.07.2019 18:10, dval1146
You are making beer. the first step is filling the glass carboy with the liquid wort. the internal diameter of the carboy is 15 in., and you wish to fill it up to a depth of 2 ft. if your wort is drawn from the kettle using a siphon process that flows at 3 gpm, how long will it take to fill?
Answers: 1
image
Engineering, 04.07.2019 18:20, cxttiemsp021
Atank with constant volume contains 2.27 kg of a mixture of water phases (liquid-vapor). in the initial state the temperature and the quality are 127 Β°c and 0.6, respectively. the mixture is heated until the temperature of 160 oc is reached. illustrate the process in a t-v diagram. then, determine (1) the mass of the vapor in kg at the initial state, (2) the final pressure in kpa.
Answers: 3
Do you know the correct answer?
A closed system consisting of 4 lb of a gas undergoes a process during which the relation between pr...

Questions in other subjects:

Konu
SAT, 28.02.2020 05:23