Engineering, 21.06.2020 00:57, Itssata

Draw a fourbar linkage with L1 = 10 cm, L2 = 3 cm L3 = 6 cm and L4 = 6 cm, with LaTeX: \theta_2θ 2= 45o. Consider both configurations in your drawing, namely the open and closed. Measure your transmission angles and indicate which is which. Do you see a difference in values? (0.25 point - lengths measurements)
(0.5 point - angles measurements)
(0.5 point - both configurations)
(0.5 point - neatness)
(0.5 points – links dwg)
(0.25 points - transmission angles measurements)

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, qwertylol12345

Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.

Answers: 2

continue

Engineering, 04.07.2019 18:10, ijohnh14

Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way

Answers: 2

continue

Engineering, 04.07.2019 18:10, chadatkin

Which of the following ziegler nichols tuning methods the response of the controller to a step input should exhibit an s-shaped curve? a)-open loop mode b)-closed loop mode c)-both modes (open & closed) d)-none of the modes (open & closed)

Answers: 3

continue

Engineering, 04.07.2019 19:10, jennymares

Abarometer contains mercury with a density of 13600 kg/m3. atmospheric conditions are 95.8 kpa and 20 °c at 20 °c, the vapor pressure of the mercury is 0.000173 kpa. the column of mercury will rise to a height of most nearly. select one: a)- 0.38 m b)- 0.82 m c)- 0.48 m d)- 0.72 m

Answers: 1

continue

Do you know the correct answer?

Draw a fourbar linkage with L1 = 10 cm, L2 = 3 cm L3 = 6 cm and L4 = 6 cm, with LaTeX: \theta_2θ 2=...