Engineering, 18.06.2020 18:57, ashiteru123

The cross-braces (labeled 1 and 2) in the truss are cables that can support only tension and not compression. They slip past each other where they cross; i. e. they are not pinned together there. (a) Please indicate which of the two cross-braces is in tension (the other will be slack, with zero force), and calculate its tension.
(b) Now suppose that the cross-braces are replaced with regular rigid struts that can support both tension and compression. Would the structure now be statically determinate

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, aaliyah80

The drive force for diffusion is 7 fick's first law can be used to solve the non-steady state diffusion. a)-true b)-false

Answers: 1

continue

Engineering, 04.07.2019 18:10, Talos02

Burgers vector is generally parallel to the dislocation line. a)-true b)-false

Answers: 2

continue

Engineering, 04.07.2019 18:10, 0436500

Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.

Answers: 1

continue

Engineering, 04.07.2019 18:20, kodyclancy

Aquick transition of the operating speed of a shaft from its critical speed will whirl amplitude. (a) increase (b) limit (c) not affect (d) zero

Answers: 2

continue

Do you know the correct answer?

The cross-braces (labeled 1 and 2) in the truss are cables that can support only tension and not com...