Engineering, 16.06.2020 20:57, ayoismeisalex
The velocity profile for a thin film of a Newtonian fluid that is confined (4mm) between the plate and a fixed surface is defined by u=(10y-0.25y2 ) mm/s where y is in mm. Determine the force P that must be applied to the plate to cause this motion. The plate has a surface area of 5000mm2 in contact with the fluid. Take µ= 0.532 N. s/m2 (
Answers: 1
Engineering, 04.07.2019 18:20, samueltaye
Modern high speed trains do not have perpendicular expansion gaps where rails are joined end-to-end any more they are mostly welded together but what might happen if there was a spell of particularly hot weather that causes inspection of the tracks?
Answers: 1
Engineering, 04.07.2019 19:10, Destinationz
Asteam is contained in a rigid tank with a volume of 1 m3. initially, the pressure and temperature are 7 bar and 500 oc, respectively. the temperature drops due to cooling process. determine: (1) the temperature at which condensation begins in °c, (2) the fraction of the total mass that has condensed when the pressure decreased to 0.5 bar. (3) the volume in m3 occupied by saturated liquid at the final state?
Answers: 3
Engineering, 04.07.2019 19:10, nbunny7208
What is the chief metrological difference between measuring with a microscope and with an electronic comparator? a. the microscope is limited to small workpieces. a. the microscope is limited to small workpieces. c. the comparator can only examine one point on the workpiece. d. the microscope carries its own standard.
Answers: 1
The velocity profile for a thin film of a Newtonian fluid that is confined (4mm) between the plate a...
English, 02.03.2021 18:40
Arts, 02.03.2021 18:40
Mathematics, 02.03.2021 18:40
Mathematics, 02.03.2021 18:40
English, 02.03.2021 18:40