Engineering, 16.06.2020 20:57, hannahkharel2

Air enters a household electric furnace at 75°F, 1 atm, with a volumetric flow rate of 800 ft3/min. The furnace delivers air at 120°F, 1 atm to a duct system with three branches consisting of two 6-in.-diameter ducts and a 12-in. duct. The air behaves as an ideal gas. If the velocity in each 6-in. duct is 10 ft/s. Determine for steady-state operation a. the mass flow rate of air entering the furnace, inlb/s.
b. the volumetric flow rate in each 6-in. duct, inft^3/min.
c. the veloctiy in the 12-in. duct, in ft/s.

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, hadellolo8839

Acompressor receives the shaft work to decrease the pressure of the fluid. a)- true b)- false

Answers: 3

continue

Engineering, 04.07.2019 18:10, anna22684

Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.

Answers: 2

continue

Engineering, 04.07.2019 18:10, wirchakethan23

Hydraulic fluid with a sg. of 0.78 is flowing through a 1.5 in. i. d. pipe at 58 gal/min. the fluid has an absolute viscosity of 11.8 x 105 lbf-sec/ft2. is the flow laminar, turbulent or within the critical range? give both a numerical reynolds number and a term answer.

Answers: 3

continue

Engineering, 04.07.2019 18:20, ashleyjaslin

Derive the correction factor formula for conical nozzle i=-(1+ cosa) and calculate the nozzle angle correction factor for a nozzle whose divergence hal-fangle is 13 (hint: assume that all the mass flow originates at the apex of the cone.

Answers: 3

continue

Do you know the correct answer?

Air enters a household electric furnace at 75°F, 1 atm, with a volumetric flow rate of 800 ft3/min....