Engineering, 14.06.2020 01:57, Demondevilg

1) We want to design a heterojunction InP / InGaAsP / InGaAs LED for 1.3 m emission with an area A = 0.01 mm2 and an output optical power Pout = 10 mW. The maximum injected charge density in the active InGaAsP layer is n = 5 x 1017 cm-3 . The effective refractive index of the heterostructure is 3.5 and the refractive index of the encapsulation material is 1.5. Evaluate the thickness of the active region assuming the radiative lifetime is 3 ns and external quantum efficiency is 40%. (You can assume that the extraction is only affected by the reflection losses, therefore extraction efficiency can be assumed to be equal to (1- Reflectance). To simplify the calculations, you can assume that the photons are only hitting the boundaries at normal incidence)

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, kayabwaller4589

When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point

Answers: 3

continue

Engineering, 04.07.2019 16:10, Arealbot

The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.

Answers: 1

continue

Engineering, 04.07.2019 18:10, yasminothman02

An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet

Answers: 3

continue

Engineering, 04.07.2019 18:10, abdirahmansoloman

Air is to be cooled in the evaporator section of a refrigerator by passing it over a bank of 0.8-cm-outer-diameter and 0.4-m-long tubes inside which the refrigerant is evaporating at -20°c. air approaches the tube bank in the normal direction at 0°c and 1 atm with a mean velocity of 4 m/s. the tubes are arranged in-line with longitudinal and transverse pitches of sl- st 1.5 cm. there are 30 rows in the flow direction with 15 tubes in each row. determine (a) the refrigeration capacity of this system and (b) pressure drop across the tube bank. evaluate the air properties at an assumed mean temperature of -5°c and 1 atm. is this a good assumption?

Answers: 1

continue

Do you know the correct answer?

1) We want to design a heterojunction InP / InGaAsP / InGaAs LED for 1.3 m emission with an area A...