Engineering, 12.06.2020 02:57, JojoSiwa901

C) Three AC voltages are as follows: ei= 80 sin wt volts;
e2 = 60 sin (wt + π/2) volts;
e3= 100 sin (wt-π/3) volts.
Find the resultant e of these three voltages and express it in the form
Em sin wt+-&).
When this resultant voltage is applied to a circuit consisting of a 10 resistor and a
capacitance of 17.3 2 reactance connected in series, find an expression for the
instantaneous value of the current flowing, expressed in the same form.

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, volleyballfun24

If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.

Answers: 3

continue

Engineering, 03.07.2019 15:10, brooklyn674

Apiston-cylinder with a volume of 0.25 m3 holds 1 kg of air (r 0.287 k/kgk) at a temperature of 100 c. heat transfer to the cylinder causes an isothermal expansion of the piston until the volume triples. how much heat is added to the piston-cylinder?

Answers: 3

continue

Engineering, 04.07.2019 19:10, babas97

What is a monomer? how do they form a ploymer from the view point of chemical bonding?

Answers: 1

continue

Engineering, 04.07.2019 19:10, jennymares

Abarometer contains mercury with a density of 13600 kg/m3. atmospheric conditions are 95.8 kpa and 20 °c at 20 °c, the vapor pressure of the mercury is 0.000173 kpa. the column of mercury will rise to a height of most nearly. select one: a)- 0.38 m b)- 0.82 m c)- 0.48 m d)- 0.72 m

Answers: 1

continue

Do you know the correct answer?

C) Three AC voltages are as follows: ei= 80 sin wt volts;
e2 = 60 sin (wt + π/2) volts;
e...