Engineering, 12.06.2020 00:57, Esmail
17-28: The assembly has a mass of 8 g and is hoisted using the boom and pulley system. If the winch at B draws in the cable with an acceleration of 2 m/s 2 , determine the compressive force in the hydraulic cylinder needed to support the boom. The boom has a mass of 2 g and mass center at G.
Answers: 1
Engineering, 04.07.2019 18:10, niyawilliams23
Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10
Answers: 1
Engineering, 04.07.2019 18:10, demarcuswiseman
Calculate the bore of a cylinder that has a stroke of 18 inches and an extension time of 6 seconds at a flow rate of 4 gal/min.
Answers: 3
Engineering, 04.07.2019 18:20, 1230bering
Select any two (2) areas of applications of chain-drive. (clo4) a)-permanent lubrication necessary b)-hydraulic forklift truck operation c)-rigging and heavy moving materials d)-relatively high maintenance costs e)-costlier than belt drives
Answers: 2
17-28: The assembly has a mass of 8 g and is hoisted using the boom and pulley system. If the winch...
Chemistry, 11.09.2020 15:01
Mathematics, 11.09.2020 15:01
Mathematics, 11.09.2020 15:01
Mathematics, 11.09.2020 15:01
Mathematics, 11.09.2020 15:01
Mathematics, 11.09.2020 15:01
Mathematics, 11.09.2020 15:01
Mathematics, 11.09.2020 15:01
Social Studies, 11.09.2020 15:01
Mathematics, 11.09.2020 15:01