Engineering, 11.06.2020 01:57, alyea231

Share Strength A C8 * 18.75 is to be used as tension number. The channel is bolted to a 3/8 inch gusset plate with 7/8 inch diameter, A307 bolts. A tension number is A527 Grade 50 steel and the gusset plate is A36.
A. Check all bolt spacing and edge distance requirements.
B. Calculate the design tensile strength of the tension member. Assume block shear will not govern and the gusset plate has sufficient tensile strength.

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, siri5645

At 12 noon, the count in a bacteria culture was 400; at 4: 00 pm the count was 1200 let p(t) denote the bacteria cou population growth law. find: (a) an expression for the bacteria count at any time t (b) the bacteria count at 10 am. (c) the time required for the bacteria count to reach 1800.

Answers: 1

continue

Engineering, 04.07.2019 18:10, agpraga23ovv65c

Carbon dioxide gas expands isotherm a turbine from 1 mpa, 500 k at 200 kpa. assuming the ideal gas model and neglecting the kinetic and potential energies, determine the change in entropy, heat transfer and work for each kilogram of co2.

Answers: 2

continue

Engineering, 04.07.2019 18:10, oliviasoreo92

Compute the pressure drop of 30°c air flowing with a mean velocity of 8 m/s in a circular sheet-metal duct 300 mm in diameter and 15 m long. use a friction factor, f 0.02, and pair = 1.1644 kg/m a. 37.26 pa b. 25.27 pa n c. 29.34 pa d. 30.52 pa

Answers: 1

continue

Engineering, 04.07.2019 19:10, phantomlizz3233

In general, how do thermosetting plastics compare to thermoplastics in mechanical and physical properties?

Answers: 3

continue

Do you know the correct answer?

Share Strength A C8 * 18.75 is to be used as tension number. The channel is bolted to a 3/8 inch gu...