Engineering, 07.06.2020 02:57, hillmarilyn70pe8sy6

A special C-clamp uses a 0.75-in.-diameter Acme thread and a collar of 1-in. effective mean diameter. The collar is attached rigidly to the top end of the externally threaded member. Determine the force required at the end of the 6-in. handle to develop at 300-lb clamping force. The friction coefficient in the thread is 0.2 and in the collar is 0.15. what is efficiency of the power screw

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, Talos02

Burgers vector is generally parallel to the dislocation line. a)-true b)-false

Answers: 2

continue

Engineering, 04.07.2019 18:10, xboxdude06

Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.

Answers: 1

continue

Engineering, 04.07.2019 18:10, nandalabella06

True or false (explain) (110)[111] is a slip system in bcc metals . the {111} family in fcc contains 8 planes. resolved shear stress (rss) in single crystals is just related to the applied stress. critical resolved shear stress (crss) in single crystal metals is direct proportional to the number of defects in the structure

Answers: 2

continue

Engineering, 06.07.2019 03:10, tatedason33741

Asolid steel sphere (k=63.9 w m-1 k-1 , ? =7832 kg m-3 , c=0.523 kj kg-1 k-1 ), 100 mm in diameter is initially at a uniform temperature of 500o c and is suddenly quenched in a large oil bath for which t? = 100o c and h = 3200 w m-2 k-1. estimate the time required for the sphere to cool to 200o c and to 110o c

Answers: 1

continue

Do you know the correct answer?

A special C-clamp uses a 0.75-in.-diameter Acme thread and a collar of 1-in. effective mean diameter...