A carrier signal with a frequency of 100 MHz, frequency by band limited information sign with 2 KHz modulating. Maximum frequency deviation of the FM sign (Δf) 25 KHz and information sign amplitude (Am) If it is 15.7 Volts;
a) Calculate the bandwidth of the FM sign?
b) The bandwidth of the FM signal is doubled and the frequency modulation constant is taken if kf = 10000
What can be said about the signal to noise ratio (SNR) of the signal, why?

Amass of 1.5 kg of air at 120 kpa and 24°c is contained in a gas-tight, frictionless piston-cylinder device. the air is now compressed to a final pressure of 720 kpa. during the process, heat is transferred from the air such that the temperature inside the cylinder remains constant. calculate the boundary work input during this process.

Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.

An engine runs on the ideal diesel cycle. the cycle has a compression ratio of 20 and a cutoff ratio of 2. the highest temperature in the cycle is 1200 k. if the heat into the system is 300 kj/kg of working fluid and using variable specific heats determine the work produced per mass of working fluid