Engineering
Engineering, 05.06.2020 05:02, kj44

Choose the most appropriate answer in each of the following cases (with a brief justification). A: Given a channel capacity C shared by N stations that generate data at maximum rates, the CDMA-based transmission of data using M-chip code sequences allows each station to enjoy an effective transmission bandwidth share B, where: (i) B ā‰ˆ C N (ii) B ā‰ˆ C M (iii) B ā†’ C(āˆ’) (iv) B ā‰ˆ C N+M

B: IEEE 802.3 Ethernet (CSMA/CD) specifies a minimum data packet size, because: (i) Applications always generate large sized data packets (ii) Channel efficiency increases by amortizing the header overhead across a certain minimum packet size (iii) The sender of a packet should transmit long enough to hear any collisions that may occur at the farthest end of bus (iv) The application programming becomes simpler by sending a less number of large-sized packets

C: In comparison to transmission over a wired network, the signal strength over a wireless network decays rapidly with respect to the distance of receiver, because: (i) Signal energy propagates faster over wireless medium than over wired medium (ii) Signal energy propagates in all directions over wireless medium, whereas energy propagates only in the direction of wired medium; (iii) Noise signals are stronger in wireless medium that in wired medium (iv) Signal is sent on a high frequency carrier over wireless medium, whereas signal is sent as baseband over wired medium.

answer
Answers: 3

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:20, sanchez626
Aheavily insulated piston-cylinder device contains 0.02 m3 of steam at 300 kpa and 200 Ā°c. 1.2 mpa. d this process. team is now compressed in a reversible manner to a pressure of etermine the entropy change and the work done on the steam during this process
Answers: 1
image
Engineering, 04.07.2019 19:10, netflixacc0107
What is the major difference between thermoplastics and thermosetting plastics from the polymerization structure point of view?
Answers: 2
image
Engineering, 06.07.2019 02:30, sandy2597
Precipitation hardening can be achieved in many light alloys by a three-step heat treatment. what is carried out and what is the purpose at each step? why is such a treatment necessary based on the nucleation and growth theory of phase transformation. compare this treatment with tempering martensite for carbon steels (similarities and differences).
Answers: 1
image
Engineering, 06.07.2019 04:10, kulvindar1984
Ahousehold refrigerator operating steadily and with a coefficient of performance of 2.5 removes energy from a refrigerated space at a rate of 650 kj/h. evaluating electricity at $0.06 per kw. h, determine the cost of electricity in a month when the refrigerator operates for 360 hours.
Answers: 3
Do you know the correct answer?
Choose the most appropriate answer in each of the following cases (with a brief justification). A:...

Questions in other subjects:

Konu
English, 20.05.2021 06:50
Konu
History, 20.05.2021 06:50