Engineering, 02.06.2020 16:57, AngstyGroot

A crane is used to lift a crate weighing 1,000 N. The cable that lifts the crate has a radius of 5.64 mm. The initial length of the cable is 30 m when it is subject to the full weight of the crate.
a. When the cable is lifting the full weight, what is the stress in the cable?
b. How much will the cable stretch if it is made from titanium (E = 114 GPa, Yield Stress = 140MPa)?
c. How much will the cable stretch if it is made from nylon (E = 3.75 GPa, Yield Stress = 63.6 MPa)?
d. For each material, what is the minimum cable diameter that can be used to lift the weight before it yields?

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 19:30, 10040813

When using the ohmmeter function of a digital multimeter, the leads are placed in what position relative to the component being tested? a. parallel b. control c. series d. line

Answers: 3

continue

Engineering, 04.07.2019 18:10, hadellolo8839

Acompressor receives the shaft work to decrease the pressure of the fluid. a)- true b)- false

Answers: 3

continue

Engineering, 04.07.2019 18:10, jojoangelique13

The flow rate of air through a through a pipe is 0.02 m5/s. a pitot static tube is placed in the flow. the radius of the pitot static tube is 1 mm. assuming the flow to be steady and the air to be at 300k, calculate the difference in total and static pressure if the diameter of the pipe is: (a) d 0.1 m d 0.05 m (c) d 0.01 m

Answers: 2

continue

Engineering, 04.07.2019 18:20, alexis9263

Have a greater impact on maintenance productivity than any other support group. (clo5) a)-the top management b)-inventory and purchasing c)-sub-contracting d)-cmms

Answers: 2

continue

Do you know the correct answer?

A crane is used to lift a crate weighing 1,000 N. The cable that lifts the crate has a radius of 5.6...