Engineering, 27.05.2020 23:06, darianhaynes

Assuming that only CaSO3 is produced, calculate the daily production rate (in tons/day) of a 55%-solids sludge from a 90%-efficient limestone FGD system on a 600-MW power plant burning 3.5%-sulfur coal. The plant has a thermal efficiency of 35%, and the coal has a heating value of 12,000 Btu/lbm. Assume that the limestone is 95% CaCO3 and 5% inert substances, and that the ratio of the actual amount of limestone fed to the theoretical amount required is 1.15. Cooper, C. David. Air Pollution Control: A Design Approach (p. 519). Waveland Pr Inc. Kindle Edition.

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, mm016281

What difference(s) did you notice using a pneumatic circuit over hydraulic circuit. explain why the pneumatic piston stumbles when it hits an obstacle.

Answers: 2

continue

Engineering, 04.07.2019 18:10, lerasteidl

Determine whether or not it is possible to compress air adiabatically from k to 140 kpa and 400 k. what is the entropy change during this process?

Answers: 3

continue

Engineering, 04.07.2019 18:10, johnthienann58

Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented

Answers: 2

continue

Engineering, 04.07.2019 18:10, salazjlove

Which of the following refers to refers to how well the control system responds to sudden changes in the system. a)-transient regulation b)- distributed regulation c)-constant regulation d)-steady-state regulation

Answers: 1

continue

Do you know the correct answer?

Assuming that only CaSO3 is produced, calculate the daily production rate (in tons/day) of a 55%-sol...